Book a Critique Space

Stairwells must remain unobstructed for safe exiting at all times.

If student work is found in stairwells, and constitutes a risk of safety to others or damage to university property, the Student Conduct Policy will be followed.

How to Protect Common Space

Do not install artwork in the following areas:

• in or around elevators
• from overhead pipes, beams, ventilation pipes, sprinkler heads or light fixtures
• on or above doors or on door glass
• in front of doors, windows, or fire exits
• stairwells, washrooms, student lounge or cafeteria

Do not paint:

• Wooden beams
• Metal beams
• Floors + carpets
• Thermostats
• Doors + windows
• Electrical outlets
• Baseboards
• Door jambs
• Ceilings
• Metal corner guards
• Lights + light fixtures
• Telephones
• Switch plates
• Fire pull stations/bells
• Air ducts
• Room numbers
• Fire extinguishers

Please note:

• No candles, flames or burning of any kind
• Fire extinguishers must never be obstructed or moved
• Any screws, nails, staples or hooks used during installation are to be removed afterwards
• Fasteners (screws, nails, etc.) cannot exceed 30mm in length
• Fasten artwork only to walls that are plywood-backed. OK to use masking tape or painter¡¯s tape on any walls
• Do not cut, drill, nail or use fasteners on beams, posts, concrete floors/walls etc.
• Electrical outlets, door jambs and baseboards etc. must be masked over with tape and paper before painting. Do
• not remove switch covers or electrical outlet covers
• When painting use drop sheet to cover floor and carpeting
• Do not use glue or felt pens on walls or other surfaces
• For 3D work, ensure that there is clearance of at least 5 feet around one side to allow safe passage for people in
• the area of your work
• Also, for 3D work, be sure that there are no pointy parts at eye level that could injure people as they pass by

• The university is not responsible for loss, theft, or damage to students¡¯ work. This includes work that may be damaged as a result of computer failure or faulty equipment.
• Any installations found on campus without approval will be removed at the student¡¯s expense.
• Installations are not permitted in stairwells, as these are areas of refuge. Additionally, items cannot be hung down through the light wells; when the electronic sensors in the light wells are disturbed, they activate an alarm system and cause emergency gates within the light wells to close.
• When installing artwork, students are reminded to be respectful of others¡¯ work. If there are items installed in a space, please check with Community Bookings before removing the work.
• All spaces must be restored to their original condition at the time of deinstall. Be sure to include time for this task when booking the space. Failure to restore the space will result in the student being charged for any work and materials needed to fix the area, and may affect any approval of future space booking requests.
• Tool and paint supplies are available through the Tool Checkout + Resale Materials. Guidance for filling, sanding, or painting is available from your Studio Technician.
• If any adjustments need to be made, or you no longer require the booking contact Community Bookings.